LEAK TEST 2.0

LEAK TEST 2.0 is a device designed for accurate evaluation of tightness and volume for a wide range of products and applications. It can measure the leakage of air or other media in closed products that have been welded, glued, pressed or folded into a closed unit in the previous process. The measured volume with the help of the LEAK TEST 2.0 device is very accurate and quickly evaluated on the basis of comparing the conversion of measured values.

FILLING ADAPTERS

Adapters for filling media such as oil, petrol, diesel, air and other liquids in various forms. They are developed based on specific customer requirements. The main criteria for the production of adapters are: reliability, safety and ergonomics for comfortable work.

ROBOTIC VIN MARKING WORKPLACE

Fully automated workplace of the process of VIN numbers markingon the body. The robot positions the marking head using a camera system and punches the VIN number to the specified location. The workplace is enclosed by fencing and contains sophisticated security elements for the protection of workers and the process of VIN numbers marking.

ROBOTIC APPLICATION OF ADHESIVE

The side window adhesive station is used to apply adhesive to the 2 x Audi Q8 side windows. The station applies adhesive with robotic system on both side windows in a row in one process with application head. We used a special rotating application head with nozzle which applies adhesive to a precisely defined place on the glass, determined by a primer

LASER STATION OF PRODUCTION LABELS V1.0

The laser marking station is used to print a TPS label on the marking tape, which is then glued to a designated place on the vehicle body. The station has one tape path and one tray for TPS labels.

LEAK TEST 1.0

The device is portable and requires 230V from the standard electrical network and 6 bar compressed air for its operation. It uses two measuring principles to measure tightness, based on measuring the pressure difference during the measurement period and the air flow between the measuring device and the gearbox.

ADJUSTING THE POSITION OF THE SEALING PART

The measuring device is used for precise adjustment of the four adjusting elements. It consists of two wireless measuring jigs, two wireless logic screwdrivers and a charging (docking) station. The unit evaluates the values ​​from the sensors and controls the screwdrivers so that the screwdrivers are flushed to the worker when he reaches the required height.

CONVEYOR SYSTEM

Device is design to control the movement of semi-finished car gearboxes along the conveyor system of the production line. The device works on the basis of unambiguous identification of the position and condition of the pallet with the gearbox during the entire process of its production.

LEAK TEST 1.5

The tightness test device is a serial device designed for continuous operation, powered by 230V from a standard electrical network and 6 bar compressed air. To convert the leakage value in units [cm3 / min], the leakage conversion characteristic is used, for each method separately.

COMPACT VIN NUMBERS TEST

The device is used to check the stamped VIN number. After stamping the VIN number into the body with an embossing device, it is necessary to check it. The KEYENCE LT-9011M manual distance sensor with a range of + 0.3 / -0.3 mm is used to check the depth of the groove.